Udemy - Mastering Microcontroller TIMERS, PWM, CAN, RTC,LOW POWER

磁力链接/BT种子名称

Udemy - Mastering Microcontroller TIMERS, PWM, CAN, RTC,LOW POWER

磁力链接/BT种子简介

种子哈希：0cf2bb7e76f1e79385255f36826ba59edf3eaa85
文件大小： 11.52G
已经下载：3077次
下载速度：极快
收录时间：2021-04-18
最近下载：2025-08-01

移花宫入口

移花宫.com邀月.com怜星.com花无缺.comyhgbt.icuyhgbt.top

磁力链接下载

magnet:?xt=urn:btih:0CF2BB7E76F1E79385255F36826BA59EDF3EAA85
推荐使用PIKPAK网盘下载资源，10TB超大空间，不限制资源，无限次数离线下载，视频在线观看

下载BT种子文件

磁力链接 迅雷下载 PIKPAK在线播放 世界之窗 91视频 含羞草 欲漫涩 逼哩逼哩 成人快手 51品茶 抖阴破解版 极乐禁地 91短视频 TikTok成人版 PornHub 草榴社区 哆哔涩漫 呦乐园 萝莉岛

最近搜索

文件列表

  • 23/1. Current measurement with core-mark in Run mode-Part1.mp4 199.9 MB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/4. Backup SRAM Exercise implementation part 1.mp4 192.0 MB
  • 6. Clocks and PLL Programming/5. Exercise Clock init implementation.mp4 191.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/9. Peripheral Low Level Initialization Alternate function settings.mp4 189.0 MB
  • 8. General Purpose Timer Input Capture Unit/8. Timer Input Capture Callback Implementation.mp4 185.5 MB
  • 7. Timers/12. Timer Exercise Interrupt Mode.mp4 181.4 MB
  • 7. Timers/11. Timer Exercise Test.mp4 178.4 MB
  • 25. Current Measurement and datasheet comparison STOP Mode/2. STOP mode current measurement.mp4 173.2 MB
  • 6. Clocks and PLL Programming/10. Exercise PLL Configuration via HSI Part 1.mp4 167.8 MB
  • 7. Timers/7. Timer Exercise Understanding Timer Clock (TIMx_CLK).mp4 162.6 MB
  • 14. STM32 bxCAN/5. CAN bit timing calculation.mp4 162.6 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/6. Peripheral High Level Initialization.mp4 153.9 MB
  • 16. CAN interrupts/1. Understanding STM32 bxCAN Interrupt requests (IRQs).mp4 153.1 MB
  • 27. RTC and RTC Calendar Block/8. Exercise RTC Calendar Part-4.mp4 145.6 MB
  • 6. Clocks and PLL Programming/11. Exercise PLL Configuration via HSI Part 2.mp4 137.8 MB
  • 8. General Purpose Timer Input Capture Unit/4. Input Capture Exercise Channel Configuration.mp4 137.0 MB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/5. Backup SRAM Exercise implementation part 2.mp4 135.9 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/17. UART Data RXing in Interrupt Mode Part 2.mp4 131.0 MB
  • 9. Timer's Output Compare unit/3. Output Compare Exercise Coding Part 1.mp4 130.7 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/15. Implementing UART DATA RXing in Polling mode.mp4 126.1 MB
  • 8. General Purpose Timer Input Capture Unit/5. Input Capture Exercise Channel Configuration Coding.mp4 125.9 MB
  • 8. General Purpose Timer Input Capture Unit/6. LSE Configuration.mp4 125.3 MB
  • 30. RTC Alarm Exercises/1. RTC Alarm Exercise-1.mp4 124.1 MB
  • 6. Clocks and PLL Programming/4. Exercise OSC Init and HSE bypass.mp4 122.7 MB
  • 6. Clocks and PLL Programming/6. Exercise SYSTICK configuration and summary.mp4 119.1 MB
  • 16. CAN interrupts/2. CAN LOOPBACK interrupt mode implementation Part -1.mp4 118.9 MB
  • 27. RTC and RTC Calendar Block/5. Exercise RTC Calendar Part-1.mp4 117.0 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/5. Low level Processor specific hardware initialization Part 3.mp4 116.1 MB
  • 9. Timer's Output Compare unit/6. Output Compare Exercise Coding Part 4.mp4 112.5 MB
  • 7. Timers/10. Timer Exercise MSP Init Implementation.mp4 109.6 MB
  • 8. General Purpose Timer Input Capture Unit/3. Input Capture Exercise time base init.mp4 106.8 MB
  • 10. PWM/10. LED brightness control using PWM signal Part 2.mp4 105.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/18. UART Data RXing in Interrupt Mode Part 3.mp4 102.1 MB
  • 14. STM32 bxCAN/8. Exercise CAN loop back mode Coding Tx function.mp4 101.4 MB
  • 4. STM32 HAL and Project Architecture/4. Project Layers Interaction.mp4 99.5 MB
  • 15. bxCAN Frame filtering/4. Exercise CAN filter config implementation and testing TX-RX.mp4 96.5 MB
  • 19. Current reduction tips and tricks/4. Clock gating and RCC Low power register settings.mp4 95.5 MB
  • 6. Clocks and PLL Programming/1. Introduction to different clock sources of the microcontroller.mp4 94.2 MB
  • 10. PWM/4. PWM Exercise Part 3.mp4 93.8 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/12. UART Data TXing Part 1.mp4 90.9 MB
  • 4. STM32 HAL and Project Architecture/10. Linking Handle Structure and Peripheral.mp4 90.9 MB
  • 22. STM32 Voltage Regulator/1. STM32 voltage regulator and its modes.mp4 90.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/10. Peripheral Low Level Initialization IRQ settings.mp4 89.4 MB
  • 30. RTC Alarm Exercises/5. RTC Alarm Exercise-3.mp4 86.7 MB
  • 20. WFI and WFE/3. WFI Exercise Implementation.mp4 84.9 MB
  • 4. STM32 HAL and Project Architecture/9. Peripheral Handle Structure.mp4 84.8 MB
  • 27. RTC and RTC Calendar Block/7. Exercise RTC Calendar Part-3.mp4 84.1 MB
  • 4. STM32 HAL and Project Architecture/3. Understanding Project Hierarchy.mp4 82.4 MB
  • 6. Clocks and PLL Programming/8. Understanding HSI calibration.mp4 78.5 MB
  • 7. Timers/3. Timer Availability in STM32 MCUs.mp4 77.8 MB
  • 17. CAN normal mode and exercise/8. Exercise CAN Normal Node RX Code implementation- Part-8.mp4 76.1 MB
  • 14. STM32 bxCAN/7. Exploring bxCAN TX path.mp4 75.2 MB
  • 15. bxCAN Frame filtering/3. Exercise CAN loop back mode Coding RX function.mp4 74.6 MB
  • 19. Current reduction tips and tricks/3. Current measurement with increased UART baudrate.mp4 74.3 MB
  • 15. bxCAN Frame filtering/1. Understanding bxCAN acceptance filtering with examples.mp4 73.8 MB
  • 27. RTC and RTC Calendar Block/6. Exercise RTC Calendar Part-2.mp4 73.3 MB
  • 6. Clocks and PLL Programming/3. Exploring clock handling APIs in RCC driver files.mp4 73.2 MB
  • 3. Installing OpenSTM32 System-Workbench/2. Downloading and Installing OpenSTM32 System-Workbench.mp4 72.8 MB
  • 14. STM32 bxCAN/6. Exercise CAN loop back mode Coding init function.mp4 72.4 MB
  • 24. Current Measurement and datasheet comparison SLEEP Mode/2. SLEEP mode and Voltage regulator settings to save current.mp4 72.4 MB
  • 27. RTC and RTC Calendar Block/10. Exercise RTC Calendar Testing with system reset and STANDBY exit.mp4 71.0 MB
  • 7. Timers/13. Timer Exercise 10 Micro timer base generation.mp4 70.6 MB
  • 8. General Purpose Timer Input Capture Unit/7. Testing of LSE on MCO1 Pin.mp4 70.2 MB
  • 11. Controller Area Network Fundamentals/7. Understanding CAN differential signals.mp4 70.1 MB
  • 1. Introduction/1. what are we going to do in this course .mp4 70.1 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/7. Peripheral Low Level Initialization.mp4 69.6 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/1. Importing Source Codes.mp4 68.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/13. UART Data TXing Part 2.mp4 68.3 MB
  • 21. STM32 Low Power modes and Voltage domains/1. MCU specific low power modes.mp4 67.5 MB
  • 18. Low Power Modes/9. Exercise Implementation and current measurement without SLEEPONEXIT feature.mp4 64.5 MB
  • 6. Clocks and PLL Programming/14. Exercise PLL Configuration for 180MHz implementation.mp4 64.3 MB
  • 20. WFI and WFE/4. Understanding WFE and event register of ARM Cortex Mx processor.mp4 64.3 MB
  • 15. bxCAN Frame filtering/2. Exploring filtering data structures.mp4 64.2 MB
  • 4. STM32 HAL and Project Architecture/2. Creating and Importing Project into OpenSTM32 System Workbench – Part1.mp4 64.0 MB
  • 14. STM32 bxCAN/12. Exercise CAN loop back mode Testing and Protocol decoding.mp4 63.9 MB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/2. Different types of MCU resets.mp4 63.4 MB
  • 10. PWM/8. PWM Exercise Part 7.mp4 61.7 MB
  • 29. RTC Interrupts/1. RTC Interrupts and IRQ numbers.mp4 61.3 MB
  • 20. WFI and WFE/5. WFE wake-up behavior and Comparison with WFI.mp4 61.3 MB
  • 7. Timers/8. Timer Exercise Understanding Prescaler and Period(ARR).mp4 59.7 MB
  • 17. CAN normal mode and exercise/12. Exercise CAN Normal Node Testing TX at 1Mbitsec - Part-12.mp4 58.8 MB
  • 4. STM32 HAL and Project Architecture/7. HAL_Init().mp4 58.4 MB
  • 8. General Purpose Timer Input Capture Unit/1. Timer with input capture block.mp4 58.0 MB
  • 27. RTC and RTC Calendar Block/2. RTC BCD programming example.mp4 57.6 MB
  • 18. Low Power Modes/10. Current measurement with SLEEPONEXIT feature.mp4 57.5 MB
  • 17. CAN normal mode and exercise/3. Exercise CAN Normal Node Code Implementation - Part-3.mp4 57.4 MB
  • 4. STM32 HAL and Project Architecture/11. STM32 HAL Header File Hierarchy.mp4 56.4 MB
  • 16. CAN interrupts/3. CAN LOOPBACK interrupt mode implementation Part -2.mp4 55.8 MB
  • 13. CAN Bus Arbitration/1. Understanding CAN bit wise arbitration.mp4 55.3 MB
  • 19. Current reduction tips and tricks/6. Current measurement in IO analog mode.mp4 55.3 MB
  • 17. CAN normal mode and exercise/6. Exercise CAN Normal Node Testing TX - Part-6.mp4 54.7 MB
  • 25. Current Measurement and datasheet comparison STOP Mode/3. Microcontroller wake-up Pins discussion.mp4 54.6 MB
  • 24. Current Measurement and datasheet comparison SLEEP Mode/1. SLEEP mode current measurement.mp4 53.9 MB
  • 7. Timers/6. Timer Exercise Project creation.mp4 53.2 MB
  • 17. CAN normal mode and exercise/9. Exercise CAN Normal Node RX Code implementation- Part-9.mp4 53.1 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/2. Project Creation.mp4 53.0 MB
  • 27. RTC and RTC Calendar Block/3. RTC block diagram and RTC Clock selection.mp4 51.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/4. Low level Processor specific hardware initialization Part 2.mp4 51.2 MB
  • 4. STM32 HAL and Project Architecture/8. Understanding main.c msp.c and it.c.mp4 51.0 MB
  • 28. RTC Alarm/1. RTC Alarm Introduction.mp4 50.2 MB
  • 18. Low Power Modes/3. Processor specific low power modes.mp4 50.1 MB
  • 14. STM32 bxCAN/2. STM32 bxCAN block diagram.mp4 50.1 MB
  • 9. Timer's Output Compare unit/4. Output Compare Exercise Coding Part 2.mp4 50.0 MB
  • 9. Timer's Output Compare unit/5. Output Compare Exercise Coding Part 3.mp4 49.2 MB
  • 10. PWM/9. LED brightness control using PWM signal Part 1.mp4 48.6 MB
  • 8. General Purpose Timer Input Capture Unit/11. Input Capture Exercise with 4Mhz external signal.mp4 47.2 MB
  • 30. RTC Alarm Exercises/2. RTC Alarm Exercise-1 Testing.mp4 46.7 MB
  • 17. CAN normal mode and exercise/13. Exercise CAN Normal Configuring acceptance filtering - Part-13.mp4 46.6 MB
  • 28. RTC Alarm/2. STM32 CUBE APIs for RTC Alarm Handling.mp4 45.8 MB
  • 10. PWM/6. PWM Exercise Part 5.mp4 45.7 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/8. Peripheral Low Level Initialization configuring Pin Packs.mp4 44.5 MB
  • 12. CAN frame formats/2. Standard CAN Vs Extended CAN.mp4 44.1 MB
  • 30. RTC Alarm Exercises/6. RTC Alarm Exercise-4.mp4 43.3 MB
  • 8. General Purpose Timer Input Capture Unit/12. Input Capture Exercise with 50KHz external signal.mp4 42.9 MB
  • 12. CAN frame formats/1. CAN Message format explanation Arbitration field.mp4 42.8 MB
  • 14. STM32 bxCAN/13. STM32 bxCAN RX block diagram and acceptance filters.mp4 42.7 MB
  • 19. Current reduction tips and tricks/2. Current measurement with increased HCLK frequency.mp4 42.4 MB
  • 3. Installing OpenSTM32 System-Workbench/4. STM32 CUBE mx installation.mp4 41.2 MB
  • 6. Clocks and PLL Programming/9. PLL introduction and working principle.mp4 40.5 MB
  • 20. WFI and WFE/8. Generating Peripheral events in STM32 MCU.mp4 39.5 MB
  • 3. Installing OpenSTM32 System-Workbench/3. Installing OpenSTM32 System-Workbench.mp4 39.2 MB
  • 2. Development board details/3. Board Details and Locating Documents.mp4 39.0 MB
  • 25. Current Measurement and datasheet comparison STOP Mode/1. STOP mode and wake-up latency.mp4 38.6 MB
  • 2. Development board details/2. About the development board used in this course.mp4 38.2 MB
  • 10. PWM/7. PWM Exercise Part 6.mp4 37.7 MB
  • 10. PWM/5. PWM Exercise Part 4.mp4 37.2 MB
  • 9. Timer's Output Compare unit/1. Timer Output compare Introduction.mp4 37.0 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/11. STM32 HAL Peripheral data handling APIs.mp4 36.8 MB
  • 21. STM32 Low Power modes and Voltage domains/2. STM32 MCU voltage domains.mp4 35.8 MB
  • 20. WFI and WFE/10. WFE project implementation-Part2.mp4 35.5 MB
  • 30. RTC Alarm Exercises/4. RTC Alarm Exercise-2 Testing.mp4 35.3 MB
  • 23/2. Current measurement with core-mark in Run mode-Part2.mp4 34.9 MB
  • 18. Low Power Modes/5. Entering sleep mode using SLEEPONEXIT feature.mp4 34.7 MB
  • 14. STM32 bxCAN/9. understanding bxCAN operating modes.mp4 34.7 MB
  • 7. Timers/5. STM32 Basic Timer Assembly.mp4 34.3 MB
  • 22. STM32 Voltage Regulator/2. Voltage regulator Over Drive and Power Down mode.mp4 34.0 MB
  • 2. Development board details/4. ST-Link Driver Installation.mp4 33.9 MB
  • 2. Development board details/5. ST Link Firmware Upgrade.mp4 33.9 MB
  • 17. CAN normal mode and exercise/11. Exercise CAN Normal Node Testing- Part-11.mp4 33.7 MB
  • 8. General Purpose Timer Input Capture Unit/9. Input Capture Exercise Testing.mp4 33.1 MB
  • 6. Clocks and PLL Programming/12. Exercise PLL Configuration via HSE.mp4 33.0 MB
  • 14. STM32 bxCAN/4. Exercise CAN loop back mode Project Creation.mp4 33.0 MB
  • 14. STM32 bxCAN/1. STM32 bxCAN introdcution.mp4 32.1 MB
  • 12. CAN frame formats/3. CAN Message format explanation ACK bit.mp4 31.8 MB
  • 14. STM32 bxCAN/11. CAN loopback connection details.mp4 31.4 MB
  • 7. Timers/9. Timer Exercise Period Value Calculation.mp4 31.0 MB
  • 7. Timers/1. Introduction to Timers.mp4 30.3 MB
  • 20. WFI and WFE/1. Understanding WFI instruction.mp4 30.3 MB
  • 27. RTC and RTC Calendar Block/1. RTC Introduction.mp4 30.2 MB
  • 11. Controller Area Network Fundamentals/6. CAN single ended signals Vs Differential signal.mp4 29.4 MB
  • 7. Timers/4. Timer Availability in STM32 MCUs Summary.mp4 28.7 MB
  • 27. RTC and RTC Calendar Block/4. RTC and STM32 device HAL APIs explanation.mp4 28.6 MB
  • 11. Controller Area Network Fundamentals/5. Understanding a CAN and its parts.mp4 28.5 MB
  • 23/3. Run mode current measurement + HCLK180MHz+ all peripherals enabled.mp4 28.0 MB
  • 27. RTC and RTC Calendar Block/9. Exercise RTC Calendar Testing.mp4 28.0 MB
  • 11. Controller Area Network Fundamentals/3. CAN's most attractive features.mp4 27.5 MB
  • 23/4. Run mode current measurement + HCLK180MHz + all peripherals enabled + ART.mp4 26.6 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/19. UART Data RXing in Interrupt Mode Part 4.mp4 26.4 MB
  • 17. CAN normal mode and exercise/14. Exercise CAN Normal Configuring acceptance filtering - Part-14.mp4 26.1 MB
  • 10. PWM/1. PWM Introduction.mp4 25.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/3. Low level Processor specific hardware initialization Part 1.mp4 24.9 MB
  • 11. Controller Area Network Fundamentals/8. CAN Dominant and Recessive Signal states.mp4 24.7 MB
  • 11. Controller Area Network Fundamentals/2. Introduction to CAN.mp4 24.7 MB
  • 18. Low Power Modes/2. MCU low power modes introduction.mp4 23.5 MB
  • 18. Low Power Modes/7. waking up from SLEEPONEXIT feature.mp4 23.1 MB
  • 20. WFI and WFE/9. WFE project implementation-Part1.mp4 22.6 MB
  • 17. CAN normal mode and exercise/1. Exercise CAN Normal Node Introduction - Part-1.mp4 22.2 MB
  • 14. STM32 bxCAN/3. STM32 bxCAN self test modes.mp4 21.8 MB
  • 4. STM32 HAL and Project Architecture/6. STM32 Cube framework program flow-2.mp4 21.6 MB
  • 6. Clocks and PLL Programming/2. Understanding methods to configure the SYSCLK.mp4 21.1 MB
  • 4. STM32 HAL and Project Architecture/5. STM32 Cube framework program flow-1.mp4 20.5 MB
  • 19. Current reduction tips and tricks/1. Tips to reduce current consumption.mp4 20.2 MB
  • 17. CAN normal mode and exercise/5. Exercise CAN Normal Node Code Implementation - Part-5.mp4 19.6 MB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/1. Understanding STM32 BACKUP SRAM.mp4 19.4 MB
  • 17. CAN normal mode and exercise/10. Exercise CAN Normal Node Sending Remote Frame Part-10.mp4 19.3 MB
  • 19. Current reduction tips and tricks/5. IO analog mode and effect on current consumption.mp4 18.6 MB
  • 8. General Purpose Timer Input Capture Unit/2. Input Capture Exercise working principle.mp4 18.5 MB
  • 4. STM32 HAL and Project Architecture/1. Introduction to STM32 Cube Project Architecture.mp4 18.0 MB
  • 11. Controller Area Network Fundamentals/9. CAN signalling summary.mp4 17.4 MB
  • 12. CAN frame formats/4. ACK Summary.mp4 16.4 MB
  • 6. Clocks and PLL Programming/7. Exercise Testing.mp4 16.0 MB
  • 18. Low Power Modes/6. Exercise Usage of SLEEPONEXIT feature.mp4 15.1 MB
  • 12. CAN frame formats/5. CAN Message format explanation EOF, IFS and SOF.mp4 14.8 MB
  • 17. CAN normal mode and exercise/7. Exercise CAN Normal Node Testing TX - Part-7.mp4 14.8 MB
  • 11. Controller Area Network Fundamentals/4. Summary of CAN features.mp4 14.6 MB
  • 29. RTC Interrupts/2. RTC Interrupts Summary.mp4 14.5 MB
  • 18. Low Power Modes/4. Entering normal and deep sleep modes.mp4 14.0 MB
  • 14. STM32 bxCAN/10. Exercise CAN loop back mode MSP code implementation.mp4 13.4 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/16. UART Data RXing in Interrupt Mode Part 1.mp4 13.2 MB
  • 9. Timer's Output Compare unit/2. Output Compare Exercise Project Creation.mp4 12.6 MB
  • 11. Controller Area Network Fundamentals/1. CAN section introduction.mp4 12.4 MB
  • 12. CAN frame formats/6. CAN remote frame.mp4 12.3 MB
  • 5. Understanding STM32 HAL program flow with UART exercise/14. UART Data RXing Intro.mp4 12.0 MB
  • 18. Low Power Modes/11. SLEEPONEXIT Exercise summary.mp4 12.0 MB
  • 20. WFI and WFE/12. When to use WFE and WFI .mp4 11.6 MB
  • 9. Timer's Output Compare unit/7. Output Compare Assignment.mp4 11.0 MB
  • 10. PWM/3. PWM Exercise Part 2.mp4 10.8 MB
  • 8. General Purpose Timer Input Capture Unit/10. Input Capture Exercise Update on HSE.mp4 10.8 MB
  • 17. CAN normal mode and exercise/4. Exercise CAN Normal Node Code Implementation - Part-4.mp4 10.2 MB
  • 7. Timers/2. Types of Timers.mp4 9.4 MB
  • 20. WFI and WFE/11. Difference and similarity between WFI and WFE.mp4 9.2 MB
  • 20. WFI and WFE/7. WFE project explanation.mp4 8.7 MB
  • 17. CAN normal mode and exercise/2. Exercise CAN Normal Node Project Creation- Part-2.mp4 7.4 MB
  • 17. CAN normal mode and exercise/3. Exercise CAN Normal Node Code Implementation - Part-3.vtt 7.0 MB
  • 20. WFI and WFE/6. WFE exercise introduction.mp4 5.8 MB
  • 30. RTC Alarm Exercises/3. RTC Alarm Exercise-2.mp4 5.4 MB
  • 18. Low Power Modes/1. Section Introduction.mp4 5.3 MB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/3. BACKUP SRAM exercise Intro.mp4 4.8 MB
  • 20. WFI and WFE/2. WFI Exercise Introduction.mp4 3.9 MB
  • 6. Clocks and PLL Programming/13. Exercise PLL Configuration for 180MHz.mp4 3.9 MB
  • 18. Low Power Modes/8. Exercise test SLEEPONEXIT feature -creating a project.mp4 3.6 MB
  • 10. PWM/2. PWM Exercise Part 1.mp4 3.3 MB
  • 7. Timers/2.1 en.DM00042534.pdf.pdf 569.3 kB
  • 17. CAN normal mode and exercise/1.1 CAN Normal Mode_Without _transceiver.pdf.pdf 244.6 kB
  • 23/1. Current measurement with core-mark in Run mode-Part1.vtt 19.0 kB
  • 7. Timers/7. Timer Exercise Understanding Timer Clock (TIMx_CLK).vtt 17.2 kB
  • 16. CAN interrupts/1. Understanding STM32 bxCAN Interrupt requests (IRQs).vtt 17.0 kB
  • 6. Clocks and PLL Programming/10. Exercise PLL Configuration via HSI Part 1.vtt 17.0 kB
  • 7. Timers/11. Timer Exercise Test.vtt 16.9 kB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/4. Backup SRAM Exercise implementation part 1.vtt 16.7 kB
  • 6. Clocks and PLL Programming/5. Exercise Clock init implementation.vtt 16.7 kB
  • 7. Timers/12. Timer Exercise Interrupt Mode.vtt 16.1 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/6. Peripheral High Level Initialization.vtt 16.1 kB
  • 14. STM32 bxCAN/5. CAN bit timing calculation.vtt 16.0 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/9. Peripheral Low Level Initialization Alternate function settings.vtt 15.3 kB
  • 6. Clocks and PLL Programming/1. Introduction to different clock sources of the microcontroller.vtt 15.0 kB
  • 25. Current Measurement and datasheet comparison STOP Mode/2. STOP mode current measurement.vtt 14.9 kB
  • 9. Timer's Output Compare unit/3. Output Compare Exercise Coding Part 1.vtt 14.3 kB
  • 22. STM32 Voltage Regulator/1. STM32 voltage regulator and its modes.vtt 14.2 kB
  • 4. STM32 HAL and Project Architecture/10. Linking Handle Structure and Peripheral.vtt 14.1 kB
  • 15. bxCAN Frame filtering/1. Understanding bxCAN acceptance filtering with examples.vtt 14.1 kB
  • 8. General Purpose Timer Input Capture Unit/8. Timer Input Capture Callback Implementation.vtt 13.9 kB
  • 8. General Purpose Timer Input Capture Unit/4. Input Capture Exercise Channel Configuration.vtt 13.9 kB
  • 7. Timers/10. Timer Exercise MSP Init Implementation.vtt 13.8 kB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/5. Backup SRAM Exercise implementation part 2.vtt 12.9 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/17. UART Data RXing in Interrupt Mode Part 2.vtt 12.8 kB
  • 4. STM32 HAL and Project Architecture/9. Peripheral Handle Structure.vtt 12.5 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/15. Implementing UART DATA RXing in Polling mode.vtt 12.4 kB
  • 6. Clocks and PLL Programming/4. Exercise OSC Init and HSE bypass.vtt 12.3 kB
  • 27. RTC and RTC Calendar Block/8. Exercise RTC Calendar Part-4.vtt 12.2 kB
  • 20. WFI and WFE/5. WFE wake-up behavior and Comparison with WFI.vtt 12.1 kB
  • 30. RTC Alarm Exercises/1. RTC Alarm Exercise-1.vtt 11.8 kB
  • 10. PWM/10. LED brightness control using PWM signal Part 2.vtt 11.6 kB
  • 24. Current Measurement and datasheet comparison SLEEP Mode/2. SLEEP mode and Voltage regulator settings to save current.vtt 11.6 kB
  • 8. General Purpose Timer Input Capture Unit/3. Input Capture Exercise time base init.vtt 11.4 kB
  • 16. CAN interrupts/2. CAN LOOPBACK interrupt mode implementation Part -1.vtt 11.4 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/5. Low level Processor specific hardware initialization Part 3.vtt 11.2 kB
  • 20. WFI and WFE/4. Understanding WFE and event register of ARM Cortex Mx processor.vtt 11.1 kB
  • 27. RTC and RTC Calendar Block/5. Exercise RTC Calendar Part-1.vtt 11.0 kB
  • 9. Timer's Output Compare unit/6. Output Compare Exercise Coding Part 4.vtt 10.7 kB
  • 6. Clocks and PLL Programming/11. Exercise PLL Configuration via HSI Part 2.vtt 10.7 kB
  • 8. General Purpose Timer Input Capture Unit/5. Input Capture Exercise Channel Configuration Coding.vtt 10.6 kB
  • 6. Clocks and PLL Programming/6. Exercise SYSTICK configuration and summary.vtt 10.6 kB
  • 21. STM32 Low Power modes and Voltage domains/1. MCU specific low power modes.vtt 10.6 kB
  • 14. STM32 bxCAN/8. Exercise CAN loop back mode Coding Tx function.vtt 10.5 kB
  • 27. RTC and RTC Calendar Block/2. RTC BCD programming example.vtt 10.5 kB
  • 14. STM32 bxCAN/7. Exploring bxCAN TX path.vtt 10.5 kB
  • 8. General Purpose Timer Input Capture Unit/6. LSE Configuration.vtt 10.2 kB
  • 15. bxCAN Frame filtering/4. Exercise CAN filter config implementation and testing TX-RX.vtt 9.6 kB
  • 6. Clocks and PLL Programming/9. PLL introduction and working principle.vtt 9.5 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/18. UART Data RXing in Interrupt Mode Part 3.vtt 9.4 kB
  • 6. Clocks and PLL Programming/8. Understanding HSI calibration.vtt 9.3 kB
  • 19. Current reduction tips and tricks/4. Clock gating and RCC Low power register settings.vtt 9.3 kB
  • 13. CAN Bus Arbitration/1. Understanding CAN bit wise arbitration.vtt 9.2 kB
  • 11. Controller Area Network Fundamentals/7. Understanding CAN differential signals.vtt 9.1 kB
  • 4. STM32 HAL and Project Architecture/4. Project Layers Interaction.vtt 9.0 kB
  • 8. General Purpose Timer Input Capture Unit/1. Timer with input capture block.vtt 8.9 kB
  • 4. STM32 HAL and Project Architecture/2. Creating and Importing Project into OpenSTM32 System Workbench – Part1.vtt 8.9 kB
  • 4. STM32 HAL and Project Architecture/8. Understanding main.c msp.c and it.c.vtt 8.9 kB
  • 10. PWM/4. PWM Exercise Part 3.vtt 8.7 kB
  • 28. RTC Alarm/1. RTC Alarm Introduction.vtt 8.6 kB
  • 14. STM32 bxCAN/12. Exercise CAN loop back mode Testing and Protocol decoding.vtt 8.6 kB
  • 30. RTC Alarm Exercises/5. RTC Alarm Exercise-3.vtt 8.5 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/1. Importing Source Codes.vtt 8.5 kB
  • 27. RTC and RTC Calendar Block/3. RTC block diagram and RTC Clock selection.vtt 8.4 kB
  • 7. Timers/13. Timer Exercise 10 Micro timer base generation.vtt 8.1 kB
  • 1. Introduction/1. what are we going to do in this course .vtt 8.1 kB
  • 21. STM32 Low Power modes and Voltage domains/2. STM32 MCU voltage domains.vtt 8.0 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/12. UART Data TXing Part 1.vtt 8.0 kB
  • 10. PWM/5. PWM Exercise Part 4.vtt 7.9 kB
  • 14. STM32 bxCAN/13. STM32 bxCAN RX block diagram and acceptance filters.vtt 7.6 kB
  • 18. Low Power Modes/3. Processor specific low power modes.vtt 7.6 kB
  • 9. Timer's Output Compare unit/1. Timer Output compare Introduction.vtt 7.5 kB
  • 6. Clocks and PLL Programming/3. Exploring clock handling APIs in RCC driver files.vtt 7.4 kB
  • 20. WFI and WFE/3. WFI Exercise Implementation.vtt 7.4 kB
  • 7. Timers/5. STM32 Basic Timer Assembly.vtt 7.4 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/10. Peripheral Low Level Initialization IRQ settings.vtt 7.4 kB
  • 20. WFI and WFE/8. Generating Peripheral events in STM32 MCU.vtt 7.4 kB
  • 8. General Purpose Timer Input Capture Unit/11. Input Capture Exercise with 4Mhz external signal.vtt 7.3 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/7. Peripheral Low Level Initialization.vtt 7.2 kB
  • 4. STM32 HAL and Project Architecture/7. HAL_Init().vtt 7.2 kB
  • 17. CAN normal mode and exercise/8. Exercise CAN Normal Node RX Code implementation- Part-8.vtt 7.2 kB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/2. Different types of MCU resets.vtt 7.1 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/13. UART Data TXing Part 2.vtt 7.1 kB
  • 27. RTC and RTC Calendar Block/10. Exercise RTC Calendar Testing with system reset and STANDBY exit.vtt 7.0 kB
  • 7. Timers/1. Introduction to Timers.vtt 7.0 kB
  • 12. CAN frame formats/1. CAN Message format explanation Arbitration field.vtt 7.0 kB
  • 4. STM32 HAL and Project Architecture/3. Understanding Project Hierarchy.vtt 7.0 kB
  • 7. Timers/8. Timer Exercise Understanding Prescaler and Period(ARR).vtt 7.0 kB
  • 14. STM32 bxCAN/6. Exercise CAN loop back mode Coding init function.vtt 6.9 kB
  • 11. Controller Area Network Fundamentals/5. Understanding a CAN and its parts.vtt 6.9 kB
  • 25. Current Measurement and datasheet comparison STOP Mode/3. Microcontroller wake-up Pins discussion.vtt 6.9 kB
  • 27. RTC and RTC Calendar Block/7. Exercise RTC Calendar Part-3.vtt 6.8 kB
  • 14. STM32 bxCAN/2. STM32 bxCAN block diagram.vtt 6.5 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/2. Project Creation.vtt 6.5 kB
  • 29. RTC Interrupts/1. RTC Interrupts and IRQ numbers.vtt 6.5 kB
  • 18. Low Power Modes/10. Current measurement with SLEEPONEXIT feature.vtt 6.4 kB
  • 18. Low Power Modes/9. Exercise Implementation and current measurement without SLEEPONEXIT feature.vtt 6.4 kB
  • 12. CAN frame formats/2. Standard CAN Vs Extended CAN.vtt 6.4 kB
  • 4. STM32 HAL and Project Architecture/11. STM32 HAL Header File Hierarchy.vtt 6.4 kB
  • 7. Timers/3. Timer Availability in STM32 MCUs.vtt 6.3 kB
  • 17. CAN normal mode and exercise/6. Exercise CAN Normal Node Testing TX - Part-6.vtt 6.2 kB
  • 8. General Purpose Timer Input Capture Unit/7. Testing of LSE on MCO1 Pin.vtt 6.2 kB
  • 15. bxCAN Frame filtering/3. Exercise CAN loop back mode Coding RX function.vtt 6.2 kB
  • 22. STM32 Voltage Regulator/2. Voltage regulator Over Drive and Power Down mode.vtt 6.1 kB
  • 27. RTC and RTC Calendar Block/1. RTC Introduction.vtt 6.1 kB
  • 19. Current reduction tips and tricks/3. Current measurement with increased UART baudrate.vtt 6.1 kB
  • 10. PWM/8. PWM Exercise Part 7.vtt 6.1 kB
  • 17. CAN normal mode and exercise/12. Exercise CAN Normal Node Testing TX at 1Mbitsec - Part-12.vtt 5.9 kB
  • 15. bxCAN Frame filtering/2. Exploring filtering data structures.vtt 5.9 kB
  • 27. RTC and RTC Calendar Block/6. Exercise RTC Calendar Part-2.vtt 5.8 kB
  • 28. RTC Alarm/2. STM32 CUBE APIs for RTC Alarm Handling.vtt 5.8 kB
  • 3. Installing OpenSTM32 System-Workbench/2. Downloading and Installing OpenSTM32 System-Workbench.vtt 5.6 kB
  • 6. Clocks and PLL Programming/14. Exercise PLL Configuration for 180MHz implementation.vtt 5.6 kB
  • 17. CAN normal mode and exercise/9. Exercise CAN Normal Node RX Code implementation- Part-9.vtt 5.6 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/8. Peripheral Low Level Initialization configuring Pin Packs.vtt 5.6 kB
  • 14. STM32 bxCAN/1. STM32 bxCAN introdcution.vtt 5.5 kB
  • 17. CAN normal mode and exercise/13. Exercise CAN Normal Configuring acceptance filtering - Part-13.vtt 5.5 kB
  • 20. WFI and WFE/1. Understanding WFI instruction.vtt 5.5 kB
  • 3. Installing OpenSTM32 System-Workbench/3. Installing OpenSTM32 System-Workbench.vtt 5.4 kB
  • 7. Timers/6. Timer Exercise Project creation.vtt 5.4 kB
  • 27. RTC and RTC Calendar Block/4. RTC and STM32 device HAL APIs explanation.vtt 5.4 kB
  • 16. CAN interrupts/3. CAN LOOPBACK interrupt mode implementation Part -2.vtt 5.4 kB
  • 25. Current Measurement and datasheet comparison STOP Mode/1. STOP mode and wake-up latency.vtt 5.3 kB
  • 9. Timer's Output Compare unit/4. Output Compare Exercise Coding Part 2.vtt 5.3 kB
  • 10. PWM/1. PWM Introduction.vtt 5.2 kB
  • 19. Current reduction tips and tricks/6. Current measurement in IO analog mode.vtt 5.2 kB
  • 7. Timers/9. Timer Exercise Period Value Calculation.vtt 5.1 kB
  • 11. Controller Area Network Fundamentals/3. CAN's most attractive features.vtt 4.9 kB
  • 24. Current Measurement and datasheet comparison SLEEP Mode/1. SLEEP mode current measurement.vtt 4.9 kB
  • 14. STM32 bxCAN/11. CAN loopback connection details.vtt 4.8 kB
  • 8. General Purpose Timer Input Capture Unit/2. Input Capture Exercise working principle.vtt 4.8 kB
  • 18. Low Power Modes/5. Entering sleep mode using SLEEPONEXIT feature.vtt 4.8 kB
  • 3. Installing OpenSTM32 System-Workbench/4. STM32 CUBE mx installation.vtt 4.7 kB
  • 19. Current reduction tips and tricks/1. Tips to reduce current consumption.vtt 4.6 kB
  • 20. WFI and WFE/12. When to use WFE and WFI .vtt 4.6 kB
  • 12. CAN frame formats/3. CAN Message format explanation ACK bit.vtt 4.6 kB
  • 2. Development board details/5. ST Link Firmware Upgrade.vtt 4.6 kB
  • 30. RTC Alarm Exercises/2. RTC Alarm Exercise-1 Testing.vtt 4.4 kB
  • 30. RTC Alarm Exercises/6. RTC Alarm Exercise-4.vtt 4.4 kB
  • 10. PWM/6. PWM Exercise Part 5.vtt 4.4 kB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/1. Understanding STM32 BACKUP SRAM.vtt 4.4 kB
  • 2. Development board details/3. Board Details and Locating Documents.vtt 4.3 kB
  • 11. Controller Area Network Fundamentals/8. CAN Dominant and Recessive Signal states.vtt 4.3 kB
  • 4. STM32 HAL and Project Architecture/6. STM32 Cube framework program flow-2.vtt 4.3 kB
  • 18. Low Power Modes/2. MCU low power modes introduction.vtt 4.3 kB
  • 9. Timer's Output Compare unit/5. Output Compare Exercise Coding Part 3.vtt 4.3 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/11. STM32 HAL Peripheral data handling APIs.vtt 4.2 kB
  • 19. Current reduction tips and tricks/2. Current measurement with increased HCLK frequency.vtt 4.1 kB
  • 14. STM32 bxCAN/3. STM32 bxCAN self test modes.vtt 4.0 kB
  • 10. PWM/9. LED brightness control using PWM signal Part 1.vtt 4.0 kB
  • 14. STM32 bxCAN/4. Exercise CAN loop back mode Project Creation.vtt 4.0 kB
  • 8. General Purpose Timer Input Capture Unit/12. Input Capture Exercise with 50KHz external signal.vtt 4.0 kB
  • 2. Development board details/2. About the development board used in this course.vtt 3.9 kB
  • 6. Clocks and PLL Programming/2. Understanding methods to configure the SYSCLK.vtt 3.9 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/4. Low level Processor specific hardware initialization Part 2.vtt 3.8 kB
  • 20. WFI and WFE/10. WFE project implementation-Part2.vtt 3.8 kB
  • 30. RTC Alarm Exercises/4. RTC Alarm Exercise-2 Testing.vtt 3.7 kB
  • 11. Controller Area Network Fundamentals/2. Introduction to CAN.vtt 3.7 kB
  • 11. Controller Area Network Fundamentals/6. CAN single ended signals Vs Differential signal.vtt 3.7 kB
  • 14. STM32 bxCAN/9. understanding bxCAN operating modes.vtt 3.5 kB
  • 17. CAN normal mode and exercise/11. Exercise CAN Normal Node Testing- Part-11.vtt 3.4 kB
  • 18. Low Power Modes/7. waking up from SLEEPONEXIT feature.vtt 3.3 kB
  • 23/2. Current measurement with core-mark in Run mode-Part2.vtt 3.3 kB
  • 30. RTC Alarm Exercises/7. BONUS LECTURE.html 3.3 kB
  • 2. Development board details/4. ST-Link Driver Installation.vtt 3.2 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/3. Low level Processor specific hardware initialization Part 1.vtt 3.2 kB
  • 12. CAN frame formats/5. CAN Message format explanation EOF, IFS and SOF.vtt 3.2 kB
  • 18. Low Power Modes/6. Exercise Usage of SLEEPONEXIT feature.vtt 3.1 kB
  • 4. STM32 HAL and Project Architecture/5. STM32 Cube framework program flow-1.vtt 3.0 kB
  • 10. PWM/7. PWM Exercise Part 6.vtt 3.0 kB
  • 27. RTC and RTC Calendar Block/9. Exercise RTC Calendar Testing.vtt 3.0 kB
  • 7. Timers/4. Timer Availability in STM32 MCUs Summary.vtt 3.0 kB
  • 8. General Purpose Timer Input Capture Unit/9. Input Capture Exercise Testing.vtt 2.9 kB
  • 17. CAN normal mode and exercise/14. Exercise CAN Normal Configuring acceptance filtering - Part-14.vtt 2.9 kB
  • 17. CAN normal mode and exercise/1. Exercise CAN Normal Node Introduction - Part-1.vtt 2.8 kB
  • 11. Controller Area Network Fundamentals/1. CAN section introduction.vtt 2.8 kB
  • 4. STM32 HAL and Project Architecture/1. Introduction to STM32 Cube Project Architecture.vtt 2.8 kB
  • 6. Clocks and PLL Programming/12. Exercise PLL Configuration via HSE.vtt 2.7 kB
  • 7. Timers/2. Types of Timers.vtt 2.6 kB
  • 19. Current reduction tips and tricks/5. IO analog mode and effect on current consumption.vtt 2.5 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/19. UART Data RXing in Interrupt Mode Part 4.vtt 2.5 kB
  • 18. Low Power Modes/4. Entering normal and deep sleep modes.vtt 2.4 kB
  • 18. Low Power Modes/11. SLEEPONEXIT Exercise summary.vtt 2.3 kB
  • 23/3. Run mode current measurement + HCLK180MHz+ all peripherals enabled.vtt 2.3 kB
  • 11. Controller Area Network Fundamentals/9. CAN signalling summary.vtt 2.3 kB
  • 11. Controller Area Network Fundamentals/4. Summary of CAN features.vtt 2.3 kB
  • 23/4. Run mode current measurement + HCLK180MHz + all peripherals enabled + ART.vtt 2.1 kB
  • 12. CAN frame formats/4. ACK Summary.vtt 2.1 kB
  • 20. WFI and WFE/9. WFE project implementation-Part1.vtt 2.1 kB
  • 18. Low Power Modes/1. Section Introduction.vtt 2.1 kB
  • 12. CAN frame formats/6. CAN remote frame.vtt 2.0 kB
  • 17. CAN normal mode and exercise/4. Exercise CAN Normal Node Code Implementation - Part-4.vtt 2.0 kB
  • 17. CAN normal mode and exercise/10. Exercise CAN Normal Node Sending Remote Frame Part-10.vtt 1.9 kB
  • 17. CAN normal mode and exercise/5. Exercise CAN Normal Node Code Implementation - Part-5.vtt 1.9 kB
  • 17. CAN normal mode and exercise/2. Exercise CAN Normal Node Project Creation- Part-2.vtt 1.8 kB
  • 17. CAN normal mode and exercise/7. Exercise CAN Normal Node Testing TX - Part-7.vtt 1.8 kB
  • 20. WFI and WFE/11. Difference and similarity between WFI and WFE.vtt 1.7 kB
  • 29. RTC Interrupts/2. RTC Interrupts Summary.vtt 1.7 kB
  • 30. RTC Alarm Exercises/3. RTC Alarm Exercise-2.vtt 1.6 kB
  • 26. STM32 BACKUP SRAM and STANDBY MODE effect/3. BACKUP SRAM exercise Intro.vtt 1.5 kB
  • 9. Timer's Output Compare unit/2. Output Compare Exercise Project Creation.vtt 1.4 kB
  • 14. STM32 bxCAN/10. Exercise CAN loop back mode MSP code implementation.vtt 1.4 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/14. UART Data RXing Intro.vtt 1.4 kB
  • 5. Understanding STM32 HAL program flow with UART exercise/16. UART Data RXing in Interrupt Mode Part 1.vtt 1.3 kB
  • 20. WFI and WFE/6. WFE exercise introduction.vtt 1.3 kB
  • 6. Clocks and PLL Programming/7. Exercise Testing.vtt 1.3 kB
  • 1. Introduction/2. Important Note.html 1.3 kB
  • 10. PWM/3. PWM Exercise Part 2.vtt 1.2 kB
  • 20. WFI and WFE/2. WFI Exercise Introduction.vtt 1.2 kB
  • 9. Timer's Output Compare unit/7. Output Compare Assignment.vtt 1.2 kB
  • 10. PWM/2. PWM Exercise Part 1.vtt 1.0 kB
  • 8. General Purpose Timer Input Capture Unit/10. Input Capture Exercise Update on HSE.vtt 1.0 kB
  • 20. WFI and WFE/7. WFE project explanation.vtt 979 Bytes
  • 18. Low Power Modes/8. Exercise test SLEEPONEXIT feature -creating a project.vtt 897 Bytes
  • 6. Clocks and PLL Programming/13. Exercise PLL Configuration for 180MHz.vtt 876 Bytes
  • 1. Introduction/4. Rating and Review.html 792 Bytes
  • Visit Getnewcourses.com.url 343 Bytes
  • Visit Freecourseit.com.url 342 Bytes
  • 1. Introduction/3. Source Code.html 271 Bytes
  • 1. Introduction/ReadMe.txt 241 Bytes
  • ReadMe.txt 241 Bytes
  • 3. Installing OpenSTM32 System-Workbench/1. Note for the students.html 221 Bytes
  • 2. Development board details/1. Note for the students.html 183 Bytes
  • 2. Development board details/2.1 Board Description.html 132 Bytes
  • 2. Development board details/2.2 MCU Description.html 130 Bytes
  • 5. Understanding STM32 HAL program flow with UART exercise/1.1 Course Repo.html 102 Bytes
  • 14. STM32 bxCAN/5.1 CAN Bit Time Calculation.html 96 Bytes

随机展示

相关说明

本站不存储任何资源内容，只收集BT种子元数据(例如文件名和文件大小)和磁力链接(BT种子标识符)，并提供查询服务，是一个完全合法的搜索引擎系统。 网站不提供种子下载服务，用户可以通过第三方链接或磁力链接获取到相关的种子资源。本站也不对BT种子真实性及合法性负责，请用户注意甄别！